Oak Engineered Flooring

Posts Tagged ‘concrete’

CROMFLOOR™ Polymer Flooring System is a waterborne, decorative finish for domestic and commercial concrete floors. It is economical, hard wearing and easy to install. Available in a range of colours with multitone decorative flakes to provide a professional finish. CROMFLOOR™ Polymer Flooring System consists of 3 layers. A coloured epoxy base, decorative vinyl flakes and a hard wearing, water borne polyurethane top coat. CROMFLOOR™ Polymer Flooring System is ideal for use in workshops, showrooms, laboritories and commercial kitchens. It can also be used around the home to protect bathroom, laundry, garage and kitchen floors. Visit www.crommelin.com.au for further information on our full range of waterproofing and surface coatings.

More Discussions

A list of fitting tips to help you avoid the most common problems with laying solid or engineered wooden floors. Chauncey’s are one of the leading trade suppliers of solid and engineered oak flooring in the UK. We manufacture and supply a wide range of new and reclaimed wood flooring to trade customers. Website: www.chauncey.co.uk Blog: chaunceys.wordpress.com Thanks to John for letting us use a bit of his music at the start www.youtube.com

More Discussions

What’s the foundation of a green dream staw bale home? Watch this episode and find out. It’s all about discovering a world of options and eco-friendly innovations so that you, too, can break ground lay the cornerstone on better living through green building.

More Discussions

GoRambling.com Discover more free ideas at my website today My wife and I are planning on building a vertical log cabin, often referred to as a stockade style log cabin. Here are some pictures to give you an idea. Here’s one…here’s another, and here you go. Anyway we’ll be moving to Alaska, probably near the Kenai Peninsula or Matanuska Valley. Of course we’re going to try and avoid permafrost, but who knows exactly what kind of land we’ll buy. Our vertical log cabin in Alaska will be constructed on concrete posts that’ll be poured into Sonotubes that are buried below the frost line (probably around 40 to 50 inches underground). And then the posts will come up about 18 inches into the air…at which point we’ll begin the cabin. So yes, the cabin will be raised about 18 inches off the ground. Anyway, I have no experience to build anything of this magnitude, but this doesn’t scare me. My wife and I look forward to the challenge. So needless to say, I have a lot of questions, lots more research to do, and plenty of planning that awaits us. I’m posting this video to present my plan for the concrete posts and the insulated floor that will sit atop these 10 concrete posts. First, here is my rough sketch for our small vertical log cabin. It’s 10 feet by 35 feet. I’ve kind of modeled it after an RV, so I call it our RV cabin. It seems like it’ll be a nice comfortable cabin that will serve us well. And it seems like it’ll be somewhat easier to build than other plans. Anyway, I …

More Discussions

Padco t-bar floor coaters apply a smooth, streak-free finish at up to 10000 square feet per hour. For use with water based and solvent based finishes on hardwood, concrete, vinyl, tile, stone, terrazzo, and all other hard, flat floor surfaces. See us at www.padco.com/floortools . (800) 328-5513

More Discussions

concrete block, concrete wall, concrete floor, concrete equipment, concrete forms, penobeton, floor insulation

More Discussions

Bostik SingleApp wood flooring adhesive saves time, money and hassle by combining two products into one. Bostik SingleApp eliminates the need for a separate moisture vapor membrane when installing wood and bamboo flooring. SingleApp is available for purchase exclusively at Lowe’s stores. After preparing the concrete by cleaning it and clearing away debris, you can begin applying Bostik SingleApp. First, there may be surface skinning on the adhesive in the container; clear this away by cutting around the edges and throwing out the skinning. Following the instructions included with your flooring, prepare the work area. This may include allowing for an expansion space, and securing a starter row to the sub-flooring. Also, be sure to use the appropriate sized trowel for your flooring type. Mark out a 2-3 foot wide work space. Then pour the adhesive directly onto the concrete, using the trowel to stop the flow when you have enough. Spread the adhesive with the trowel at a 45 degree angle to avoid gaps or excess adhesive. Once you have filled your workspace with adhesive, lay the boards in a long-medium-short pattern to stagger the seams. Immediately clean up any adhesive that gets on the boards using Bostik’s Ultimate Adhesive Remover and a non-abrasive clean cloth. Curing, or drying, time for Bostik SingleApp adhesive is about 8-10 hours for light foot traffic, and 24 hours for regular foot traffic. Save yourself time, money and hassle on your next hardwood installation by …

More Discussions

Garage Floor Concrete Pour.

More Discussions

www.askmediy.com How to clean your oil stain garage floor fast and easy with kitty litter

More Discussions

This film outlines which method you should choose to fit your wooden floor depending on whether you have solid or engineered flooring and also taking into consideration what type of subfloor you have. Chauncey’s are one of the leading trade suppliers of solid and engineered oak flooring in the UK. We manufacture and supply a wide range of new and reclaimed wood flooring to trade customers. Website: www.chauncey.co.uk Blog: chaunceys.wordpress.com Thanks to John for letting us use a bit of his music at the start www.youtube.com

More Discussions